Call us now on: 01234 356666

Panelling & Trims

We offer a range of different timber and internal sauna trims which can be purchased by the metre. Our sauna panelling is 18mm thick which will last considerably longer than thinner timber offered by our competitors. Each sauna panel has an 86mm linear coverage. If you are unsure how much timber you will need just give us a call with your saunas internal dimensions and we will work it out for you.

Our sauna wood is machined with two expansion grooves to the underside. (See the PDF drawing for details.) These grooves help prevent the panel from curling during its lifetime in a sauna. Saunas undergo extremes of temperatures in a 24-hour cycle. Heated to temperatures often exceeding 95deg C with high humidity one minute then dry as a bone the next. All day every day. This is why it’s important to use properly machined cladding for any repairs and over-cladding you may be considering.


Results 1 - 7 of 7

Pine

Part No. SVS04

The most cost effective choice for most Commercial sauna operators.

Canadian Hemlock

Part No. SVS05

Whilst more expensive than Pine, Canadian Hemlock sauna cladding is a very hard wearing timber.

Western Red Cedar

Part No. SVS06

Western Red cedar is unquestionably the most attractive timber one can use in a sauna.

Obechi

Part No. SVS14

Obechi is a specialist West African hardwood.

Obechi Sauna Bench slat

Part No. SVS07

25mm x 95mm. Machined with a 10mm radius on each side..

Obechi Ceiling Trim

Part No. SVS09

28mm x 28mm. An elegant Obech trim machined with a 10mm round profile along one edge.

Obechi slats

Part No. SVS08

This profile is used in the production of our bench fronts and back rests.